Fault finder: Nokia 5110 retro display games

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Blank screen: what should I check?

Raise or lower the contrast, and check RST and CE.

Garbled pixels: what should I check?

Check the order of CLK, DIN and DC.

Backlight never lights: what should I check?

Some modules are active low. Invert the BL write.

Snake does not turn: what should I check?

Check button wiring to ground and the pin numbers.