Fault finder: Two-tone siren box
6 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 6 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 6
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No sound: what should I check?
Check power on pins 14 and 7 and the speaker wires.
Steady tone only: what should I check?
Check the 10k from pin 5 to pin 11.
No tone at all: what should I check?
Check the resets are on 5 V.
Very quiet: what should I check?
Check the polarity of the coupling capacitor.
Clicks only: what should I check?
Check the tone timing parts on pins 8, 12 and 13.
