Fault finder: M5Stack Core2 IoT panel
5 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Touch does not respond: what should I check?
Use M5Unified and check the button area.
No MQTT message: what should I check?
Check Wi-Fi, broker address and credentials.
Wrong board error: what should I check?
Select M5Core2.
