Fault finder: Long-range LoRa sensor link at 866 MHz
10 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
LoRa not found: what should I check?
Check NSS, RESET and the SPI wires. The RFM95W is 3.3 V only.
Nothing received: what should I check?
Both sides must use the same frequency, spreading factor, bandwidth and sync word.
Short range: what should I check?
Raise the antennas, keep them vertical and away from metal, or try SF10 to SF12 (slower but longer).
Legal use: what should I check?
Stay in 865 to 867 MHz and send short packets with gaps, as here.
