Fault finder: LM386 mini speaker amplifier

8 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Loud squeal or motorboating: what should I check?

The Zobel network or supply decoupling is missing, or the input wires are too long. Add the parts and shorten the wires.

Very quiet: what should I check?

The phone volume is low or the jack tip is not connected. Check it with the volume up.

Hum: what should I check?

Add the pin 7 bypass capacitor and keep input wires away from the supply.

Distortion on loud notes: what should I check?

A 9 V battery sags with a 0.5 W speaker. Lower the volume or use gain 20.