Fault finder: Lighthouse beam at dusk

7 checks for this build on the Pico. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Pico supply pin

Plug the Pico into USB. Black probe on a GND pin, red probe on the 3V3(OUT) pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Ring never lights: what should I check?

Check the data arrow, 5 V and the order of the wires.

Always lit: what should I check?

Raise DARK_BELOW, or move the LDR out of the shade.

Never lights: what should I check?

Lower DARK_BELOW and LIGHT_ABOVE, or check the divider wiring.

Flickers: what should I check?

Widen the gap between the two numbers.

Wrong colour: what should I check?

The ring may use a different order, swap the colour values.