Fault finder: Light-seeking robot
9 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Turns away from the light: what should I check?
Swap the LDR connections or flip the sign of the difference.
Does not move: what should I check?
Both readings are below the dark limit. Lower the threshold or increase the room dimness difference.
Robot wiggles a lot: what should I check?
Reduce GAIN or add shading between the LDRs.
One wheel never turns: what should I check?
Check the L298N enable jumpers and the IN wires.
