Fault finder: LED cosplay goggles
7 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Wrong colours: what should I check?
Change NEO_GRB to NEO_RGB.
Second ring dark: what should I check?
Check DOUT of ring 1 goes to DIN of ring 2.
Too bright: what should I check?
Lower setBrightness.
Battery drains fast: what should I check?
Lower brightness or use fewer LEDs.
