Fault finder: LED forward voltage by colour
7 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
LED does not light: what should I check?
Check the direction and the supply.
Voltage reads 5 V: what should I check?
The LED is open or the legs are wrong, swap it.
Reading changes: what should I check?
Check the resistor and keep the same supply.
LED very dim: what should I check?
A blue or white LED draws less current on the same resistor.
Meter reads zero: what should I check?
Check the probes touch the LED legs.
