Fault finder: LED bow tie
5 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
LEDs do not light: what should I check?
Check DIN goes to P0 and the polarity.
Random colours: what should I check?
Check the chain order and the NEO_GRB setting.
Upload fails: what should I check?
Plug the board in only when the IDE asks.
Dim or flickering: what should I check?
Charge the cell.
