Fault finder: Washing machine done notifier
5 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
ADXL345 not found: what should I check?
Check SDA on GPIO8, SCL on GPIO9 and 3V3 power.
Never reaches Running: what should I check?
Lower THRESHOLD or stick the sensor on a flatter, more rigid panel.
Alerts too early: what should I check?
Increase the 300 second still time or the soak-pause allowance.
No phone message: what should I check?
Check Wi-Fi, the notification address and that the router lets the ESP32 reach the internet.
