Fault finder: Kirchhoff's laws lab
5 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Currents do not add up: what should I check?
Check the meter range and the lead sockets; the meter itself adds a little resistance.
No current reading: what should I check?
A fuse in the meter may have blown, or the lead is in the wrong socket.
Voltages higher than expected: what should I check?
Check the resistor values with the meter.
Readings drift: what should I check?
Batteries are loaded lightly but may be old; try fresh ones.
