Fault finder: Design your first PCB in KiCad
8 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Rules check complains: what should I check?
Join each power pin to a power flag.
Footprint wrong: what should I check?
Measure the part and pick the right one.
Traces too close: what should I check?
Raise the clearance or move parts.
Missing drill file: what should I check?
Plot it separately.
