Fault finder: Keypad encoder with gates

9 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Random LED flicker: what should I check?

An input is floating; check each 10 k pull-down.

Everything lights: what should I check?

Input node touching the 5 V rail, or a missing GND on a chip.

One output stuck: what should I check?

Check the gate pins against the pinout and the chain between layers.

Chip gets warm: what should I check?

Supply wired backwards; unplug at once and check pin 14 and pin 7.

Key 0 shows nothing: what should I check?

Expected on A outputs; VALID must light.