Projects / Keypad tone dialer / Fault finder

Fault finder: Keypad tone dialer

5 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Wrong keys appear: what should I check?

Swap rows and columns or reverse the pin lists.

Nothing happens: what should I check?

Check every wire and that the keypad is not shifted by one pin.

No sound: what should I check?

Check the buzzer polarity and that it is a passive type.

Two keys at once: what should I check?

Keypads can only report one key at a time, press one.

Reads random keys: what should I check?

A loose wire, press it firmly into the header.