Fault finder: Two-mic karaoke mixer

8 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Silence: what should I check?

Check the +9 V bias reaches the mic and the 10 uF faces the right way.

Loud hum: what should I check?

Keep leads short and the input pots grounded.

Whistling: what should I check?

Move the mics away from the speakers.