Fault finder: Continuity tester with tone

5 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No sound: what should I check?

Check the supply is above 4.5 V and the buzzer is passive.

Always sounding: what should I check?

Check pin 2 and 6 are tied together.

Weak tone: what should I check?

Use the BC547 stage and a fresh battery.