Fault finder: Wireless indoor-outdoor thermometer

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Nothing received: what should I check?

Check the data pins match (TX on D12, RX on D11) and the antennas.

Garbage numbers: what should I check?

RadioHead should reject bad packets. Check the baud match and keep the antenna clear.

Reads -127: what should I check?

DS18B20 not found. Check the pull-up.

Short range: what should I check?

Fit the antennas straight and move away from metal and switching supplies.