Fault finder: Hidden camera lens finder
9 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
LEDs are dim: what should I check?
The cells are flat or one resistor is too high. Measure the battery.
Bright reflections everywhere: what should I check?
Shiny items such as bolts and glass reflect too, so check each dot's shape and the object.
Only some LEDs light: what should I check?
Check each LED's direction and solder joint.
Dot is hard to see: what should I check?
Dim the room and keep your eye close to the tube.
