Fault finder: Helping hands with USB light and fan
5 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
LED dim: what should I check?
Check the resistor value.
LED very hot: what should I check?
Improve the heat sinking.
Fan slow: what should I check?
Check the supply can give 1 A.
Flicker: what should I check?
Check the connections.
