Fault finder: GSM intruder alert by SMS
8 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
The module keeps restarting: what should I check?
The supply sags during transmit. Use the 2 A buck converter, short thick wires and the 1000 µF capacitor.
No reply to AT: what should I check?
Swap TX and RX, and check the divider on D8.
Registered but SMS fails: what should I check?
Check SMS balance, the number format and that the operator still runs 2G where you are.
Never power the SIM800L from 5 V: what should I check?
Its maximum is 4.4 V. 5 V can destroy it.
