Fault finder: Fridge door left open alarm
8 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Never beeps: what should I check?
Lower BRIGHT or move the LDR nearer the lamp.
Beeps in the dark: what should I check?
Raise BRIGHT or shield the LDR from the display light.
Resets: what should I check?
A weak coin cell; use a fresh one.
