Fault finder: Frequency divider chain
8 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No blinking: what should I check?
Check the 555 first with a spare LED on pin 3.
LEDs are very dim: what should I check?
CD4013 outputs are weak. Use 1 kΩ or a transistor buffer.
Unstable counting: what should I check?
A SET or RESET pin is floating. Tie them to GND.
Wrong frequencies: what should I check?
Capacitor tolerance. Count blinks to measure the real rate.
