Projects / Gym rep counter / Fault finder

Fault finder: Gym rep counter

5 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Counts twice per rep: what should I check?

Raise the lower threshold or lengthen the minimum time.

Misses slow reps: what should I check?

Lower the upper threshold.

No BLE: what should I check?

Check the board package and Bluetooth is on.

Motor always on: what should I check?

Check the transistor pins and the base resistor.