Fault finder: Fault-finding challenge

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Cannot find it: what should I check?

Go back to the power check.

Meter shows nothing: what should I check?

Check the range and the probes.

Two faults: what should I check?

Fix one first, then retest.

Partner cheats: what should I check?

Agree one fault only.