Fault finder: ESP32 laundry cycle end beeper
6 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 6 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 6
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Count is always zero: what should I check?
Turn the dial towards more sensitive and check DO is on GPIO27.
Count is high at rest: what should I check?
Turn the dial the other way, and fix the sensor firmly so it does not rattle.
Alerts during the soak pause: what should I check?
Raise QUIET_MINUTES to 8.
Never alerts: what should I check?
Check the buzzer wires and that the machine reached five shakes a minute.
Sensor falls off: what should I check?
Use stronger tape or a magnet.
