Fault finder: ESD wrist strap tester

9 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Always red: what should I check?

Check the ladder voltages and the comparator pins.

Always green: what should I check?

Check the red LED wiring.

Dim LEDs: what should I check?

Check the pull-up and the series resistors.

Strap reads open: what should I check?

Clean the contacts and the wrist plate.