Fault finder: Electronic dice with seven LEDs
9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
A face looks wrong: what should I check?
Two LEDs are swapped. Match each pin to its dot position.
Always the same first roll: what should I check?
Leave A0 unconnected for the random seed.
One dot never lights: what should I check?
Turn the LED round or check its resistor.
