Fault finder: Digital stopwatch
9 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Starts and stops twice per press: what should I check?
Increase the 250 ms debounce.
Reset does nothing: what should I check?
Reset only works while stopped, by design.
Display blank: what should I check?
CLK and DIO swapped.
