Fault finder: Transistor current mirror lab
5 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Output current is far from the reference: what should I check?
The transistors are very different or one is warm; use a matched pair.
No current: what should I check?
Check the base joins and emitter grounds.
Load voltage too large: what should I check?
The load is too big and Q2 is saturated.
Readings drift: what should I check?
Do not touch the transistors, since warming them changes the current.
