Fault finder: Chord arpeggio trainer

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No sound: what should I check?

Check you have a passive buzzer, not an active one, and the pin is D8.

Constant buzz: what should I check?

An active buzzer ignores the pitch, swap in a passive one.

One chord never plays: what should I check?

Check its button wiring to GND.

Notes sound the same: what should I check?

Listen for the middle note moving, it is a small change.

Upload fails: what should I check?

Choose the Old Bootloader option.