Fault finder: Carrom pocket score counter

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Counts twice: what should I check?

Increase the lockout time or reduce sensor range.

Misses coins: what should I check?

Increase range or aim it across the pocket opening.

Counts when nothing falls: what should I check?

Ambient light or the net triggers it. Lower the sensitivity.

Wrong score: what should I check?

Add an undo button that subtracts a point.