Fault finder: Macro focus stacking rail
8 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Shutter does not fire: what should I check?
Check the optocoupler side and the camera's pinout.
Steps are uneven: what should I check?
Remove backlash by always approaching from one direction.
Motor buzzes: what should I check?
Check the coil pairs and the supply.
Photos blur: what should I check?
Wait longer for vibration to settle.
