Fault finder: Eight-key buzzer piano

7 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Only a click, no note: what should I check?

You have an active buzzer, or it is backwards. Use a passive one.

A key plays nothing: what should I check?

Check that button spans the breadboard gap and its pin number.

Notes sound out of tune: what should I check?

Small buzzers are not flat across frequencies. A small 8 Ω speaker with the 100 Ω sounds better.