Fault finder: Two-player reaction game
10 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Always player 1: what should I check?
Player 2's button not on D3, or it reads LOW constantly.
Wins with 0 ms: what should I check?
A stuck-down button: check it spans the gap.
Same wait every time: what should I check?
Leave A0 unconnected so randomSeed gets noise.
