Fault finder: Breadboard power hub

9 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

5 V not stable: what should I check?

Check the buck setting and decoupling.

3.3 V low: what should I check?

Check the AMS1117 pin order.

Polyfuse trips on normal load: what should I check?

Use a higher rating or reduce the load.

LED dim: what should I check?

Check the 1 kΩ values.