Fault finder: Twist, pull, press reaction game

11 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Random game over: what should I check?

Increase the movement margin or check for noisy pots.

No voice: what should I check?

Check the SD card format and the file names.

Prompt repeats too fast: what should I check?

Add a delay after the success sound.

Resets: what should I check?

Use fresh batteries and a good ground.