Fault finder: Portable Bluetooth speaker

5 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Hum or whine: what should I check?

Add a 470 µF capacitor on the 5 V rail and keep the audio wires away from the boost converter.

No sound: what should I check?

Check the resistors reach the amplifier input and the speaker leads are not grounded.

Resets when loud: what should I check?

The boost converter is weak. Use a larger module or lower volume.

Cell does not charge: what should I check?

Check the polarity and the module's input connection.