Fault finder: Headphone amplifier
8 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Hum or buzz: what should I check?
Shorten input wires and keep them away from the batteries.
One channel quiet: what should I check?
Check pins 1, 2, 3 or 5, 6, 7 of that channel.
Chip hot: what should I check?
Switch off and look for a short or oscillation.
