Fault finder: Transistor audio level meter

10 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No LED lights: what should I check?

Check the audio level and the rectifier diode direction.

All LEDs light together: what should I check?

Diode strings are missing. Add the 1N4148 diodes.

LEDs do not fall away: what should I check?

The 100 kΩ bleed resistor is missing.

Hum on the LEDs: what should I check?

The grounds are not shared. Link the audio and battery grounds.