Fault finder: Bass and treble tone control

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Hum: what should I check?

Keep leads short and use a decent supply.

Distortion: what should I check?

Lower the input level.

No effect: what should I check?

Check the pots are in the feedback path.

Hiss: what should I check?

Use shorter, shielded leads.