Fault finder: 555 delay timer with relay

12 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 12 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 12

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Relay on at power up: what should I check?

The module is active-low and the BC547 is missing or wrong. Check the collector wiring.

Delay much longer than expected: what should I check?

Electrolytic capacitors have wide tolerance and leak. Try a new one.

Relay chatters: what should I check?

The supply sags when the relay switches. Add a 100 µF capacitor across the 5 V rail.

Never times out: what should I check?

Pin 7 is not tied to pin 6, so the capacitor never discharges.