W25Q128 SPI flash 16 MB
Serial flash for storing data or firmware.
Function128 Mbit SPI NOR flash
Supply voltage2.7 to 3.6 V
Inputs and outputsSPI / QSPI
SpeedUp to 133 MHz
Integrated CircuitsReviewedMPN W25Q128JVSIQUsed in 3 projects
In short
What is the W25Q128 SPI flash 16 MB and what is it used for?
Serial flash for storing data or firmware. Makers use it for data loggers, custom boards.
How it works
NOR flash memory organised in pages, sectors and blocks.
Key specifications
| Integrated circuit spec | Value |
|---|---|
| Function | 128 Mbit SPI NOR flash |
| Supply voltage | 2.7 to 3.6 V |
| Inputs and outputs | SPI / QSPI |
| Speed | Up to 133 MHz |
| Package | SOIC-8 |
Pinout
1CS
2DO (IO1)
3WP (IO2)
4GND
5DI (IO0)
6CLK
7HOLD or RESET (IO3)
8VCC, 2.7 to 3.6 V
How to use it
Use the SPIMemory or Adafruit SPIFlash library. Erase before writing, in 4 KB sectors. It is 3.3 V only, so level-shift from a 5 V board. Tie WP and HOLD HIGH if unused.
Applications
Data loggerscustom boards
Alternatives
- 24C02 / AT24C256 EEPROMSmall I2C memory with byte writes
Common questions
What is the W25Q128 SPI flash 16 MB used for?
In maker projects: data loggers, custom boards.
How does the W25Q128 SPI flash 16 MB work?
NOR flash memory organised in pages, sectors and blocks.
What voltage does the W25Q128 SPI flash 16 MB need?
2.7 to 3.6 V.
What can I use instead of the W25Q128 SPI flash 16 MB?
24C02 / AT24C256 EEPROM.
