Tantalum capacitor 10 µF 16 V
Small, stable capacitor for regulator outputs.
Value10 µF
Tolerance±10 or ±20 %
Power rating16 V
PackageRadial dipped or SMD
PassivesReviewedMPN T491 10uF 16VUsed in 1 project
In short
What is the Tantalum capacitor 10 µF 16 V and what is it used for?
Small, stable capacitor for regulator outputs. Makers use it for LDO outputs.
How it works
Tantalum oxide forms a thin, stable dielectric.
Key specifications
| Passive component spec | Value |
|---|---|
| Value | 10 µF |
| Tolerance | ±10 or ±20 % |
| Power rating | 16 V |
| Package | Radial dipped or SMD |
| Marking | Stripe or bar marks the positive lead |
| Watch out for | Fails short if reversed or over-voltaged |
Pinout
Stripe or longer lead+ (opposite of electrolytics)
How to use it
Note the stripe marks plus, not minus. Use a voltage rating about twice the supply, because tantalums fail short when stressed.
Applications
LDO outputs
Builds that use it
Alternatives
- Electrolytic capacitor 10 µFCheaper, more forgiving
Common questions
What is the Tantalum capacitor 10 µF 16 V used for?
In maker projects: LDO outputs.
How does the Tantalum capacitor 10 µF 16 V work?
Tantalum oxide forms a thin, stable dielectric.
What can I use instead of the Tantalum capacitor 10 µF 16 V?
Electrolytic capacitor 10 µF.
