Tactile push button 12 mm with cap
Larger push button with a coloured cap.
Colour / typeMomentary, normally open
Contact rating12 V, 50 mA
Package12 × 12 mm, 4 pins
SwitchesReviewedMPN 12x12 tact + capUsed in 3 projects
In short
What is the Tactile push button 12 mm with cap and what is it used for?
Larger push button with a coloured cap. Makers use it for game controllers, panels.
How it works
A metal dome snaps down to connect the contacts and springs back on release.
Key specifications
| LED and switch spec | Value |
|---|---|
| Colour / type | Momentary, normally open |
| Contact rating | 12 V, 50 mA |
| Package | 12 × 12 mm, 4 pins |
Pinout
4legsJoined in pairs (use two diagonally opposite legs, which are always switched)
How to use it
Wire one leg to a pin set as INPUT_PULLUP and the opposite leg to GND, so a press reads LOW. Debounce in code with a 20 to 50 ms wait.
Applications
Game controllerspanels
Builds that use it
Alternatives
- Tactile push button 6 mmSmaller
- Push button 16 mm metal (momentary, LED)Panel mount
Common questions
What is the Tactile push button 12 mm with cap used for?
In maker projects: game controllers, panels.
How does the Tactile push button 12 mm with cap work?
A metal dome snaps down to connect the contacts and springs back on release.
What can I use instead of the Tactile push button 12 mm with cap?
Tactile push button 6 mm and Push button 16 mm metal (momentary, LED).
