SIM800C GSM module
2G modem board with SIM holder and antenna.
RadioGSM / GPRS
BandQuad-band
InterfaceUART
Supply voltage3.4 to 4.4 V or 5 V board
WirelessReviewedMPN SIM800C
In short
What is the SIM800C GSM module and what is it used for?
2G modem board with SIM holder and antenna. Makers use it for SMS controllers.
How it works
A SIMCom 2G GSM and GPRS modem driven by AT commands.
Key specifications
| Wireless module spec | Value |
|---|---|
| Radio | GSM / GPRS |
| Band | Quad-band |
| Interface | UART |
| Supply voltage | 3.4 to 4.4 V or 5 V board |
| Watch out for | Check 2G coverage before buying |
Pinout
VCC5 V on most breakout boards (check yours)
GNDGround
TXD RXDSerial
PWRKEYHold low for about 1 s to turn on
AntennaSMA or IPEX
How to use it
Like the SIM800L but often on a board with a regulator and level shifting. Use TinyGSM or AT commands. It is 2G only, so use an Airtel, Vi or BSNL SIM where 2G is still live.
Applications
SMS controllers
Builds that use it
Not used in a published project yet.
Alternatives
- SIM800L GSM moduleSmaller and cheaper
- SIM A7670C 4G module4G that works on Jio
Common questions
What is the SIM800C GSM module used for?
In maker projects: SMS controllers.
How does the SIM800C GSM module work?
A SIMCom 2G GSM and GPRS modem driven by AT commands.
What voltage does the SIM800C GSM module need?
3.4 to 4.4 V or 5 V board.
How do I connect the SIM800C GSM module to an Arduino or ESP32?
UART. Pins: VCC (5 V on most breakout boards (check yours)), GND (Ground), TXD RXD (Serial), PWRKEY (Hold low for about 1 s to turn on), Antenna (SMA or IPEX).
What can I use instead of the SIM800C GSM module?
SIM800L GSM module and SIM A7670C 4G module.
