Side cutter (flush)
Cuts component leads flush with the board.
What it doesCutter
RangeCopper up to about 1.2 mm
Tools & InstrumentsReviewedMPN Flush cutter 5 inchUsed in 3 projects
In short
What is the Side cutter (flush) and what is it used for?
Cuts component leads flush with the board. Makers use it for trimming leads.
How it works
Flush-ground jaws leave a flat cut.
Key specifications
| Tool or instrument spec | Value |
|---|---|
| What it does | Cutter |
| Range | Copper up to about 1.2 mm |
Pinout
NoneTool
How to use it
Trim component leads flush after soldering. Hold the lead so it does not fly off. Do not cut steel wire.
Applications
Trimming leads
Builds that use it
Alternatives
- Wire stripper and cutterStripping
Common questions
What is the Side cutter (flush) used for?
In maker projects: trimming leads.
How does the Side cutter (flush) work?
Flush-ground jaws leave a flat cut.
What can I use instead of the Side cutter (flush)?
Wire stripper and cutter.
