Components / Sensors / NPK soil sensor (RS485)

NPK soil sensor (RS485)

Probe that reports soil nitrogen, phosphorus and potassium over Modbus.

MeasuresSoil NPK (estimated), moisture, temperature on some
InterfaceRS485 Modbus
Supply voltage5 to 24 V
Watch out forNPK values are estimates from conductivity, not a lab test
SensorsReviewedMPN NPK soil sensor RS485Used in 2 projects
RS485
In short

What is the NPK soil sensor (RS485) and what is it used for?

Probe that reports soil nitrogen, phosphorus and potassium over Modbus. Makers use it for agriculture demos.

How it works

It measures soil conductivity and estimates nutrient levels from it.

Key specifications

Sensor specValue
MeasuresSoil NPK (estimated), moisture, temperature on some
InterfaceRS485 Modbus
Supply voltage5 to 24 V
Watch out forNPK values are estimates from conductivity, not a lab test

Pinout

BrownSupply 5 to 24 V (check your version)
BlackGround
YellowRS485 A
BlueRS485 B

How to use it

Connect through a MAX485 or RS485 module and send Modbus RTU requests at the baud rate from the seller (often 4800 or 9600). Treat NPK values as estimates and compare with a soil lab test before acting on them.

Applications

Alternatives

Buy at

Common questions

What is the NPK soil sensor (RS485) used for?

In maker projects: agriculture demos.

How does the NPK soil sensor (RS485) work?

It measures soil conductivity and estimates nutrient levels from it.

What voltage does the NPK soil sensor (RS485) need?

5 to 24 V.

How do I connect the NPK soil sensor (RS485) to an Arduino or ESP32?

RS485 Modbus. Pins: Brown (Supply 5 to 24 V (check your version)), Black (Ground), Yellow (RS485 A), Blue (RS485 B).

What can I use instead of the NPK soil sensor (RS485)?

Capacitive Soil Moisture Module.