Nokia 5110 LCD (PCD8544)
Classic 84 × 48 monochrome LCD from old Nokia phones.
TypeMonochrome LCD
Resolution84 × 48
Driver ICPCD8544
InterfaceSPI
DisplaysReviewedMPN PCD8544Used in 3 projects
In short
What is the Nokia 5110 LCD (PCD8544) and what is it used for?
Classic 84 × 48 monochrome LCD from old Nokia phones. Makers use it for low-power graphics.
How it works
A PCD8544 controller driving an 84 × 48 monochrome LCD.
Key specifications
| Display spec | Value |
|---|---|
| Type | Monochrome LCD |
| Resolution | 84 × 48 |
| Driver IC | PCD8544 |
| Interface | SPI |
| Supply voltage | 3.3 V |
Pinout
RSTReset
CEChip enable
DCData or command
DINSPI data
CLKSPI clock
VCC3.3 V
BLBacklight
GNDGround
How to use it
Use Adafruit_PCD8544 and set the contrast in code. It is 3.3 V, so use a level shifter or series resistors from a 5 V board. It draws very little current, which suits battery projects.
Applications
Low-power graphics
Builds that use it
Alternatives
- SSD1306 OLED DisplayBrighter, sharper OLED
- 1.54 inch e-paper displayZero power to hold an image
Common questions
What is the Nokia 5110 LCD (PCD8544) used for?
In maker projects: low-power graphics.
How does the Nokia 5110 LCD (PCD8544) work?
A PCD8544 controller driving an 84 × 48 monochrome LCD.
What voltage does the Nokia 5110 LCD (PCD8544) need?
3.3 V.
How do I connect the Nokia 5110 LCD (PCD8544) to an Arduino or ESP32?
SPI. Pins: RST (Reset), CE (Chip enable), DC (Data or command), DIN (SPI data), CLK (SPI clock), VCC (3.3 V).
What can I use instead of the Nokia 5110 LCD (PCD8544)?
SSD1306 OLED Display and 1.54 inch e-paper display.
