Components / Boards / NodeMCU ESP8266 (CP2102)

NodeMCU ESP8266 (CP2102)

ESP8266 Wi-Fi board with USB, a 3.3 V regulator and breadboard-friendly pins.

MicrocontrollerESP8266EX, Tensilica L106
Clock80 or 160 MHz
Flash4 MB
RAMAbout 80 KB for user data
Development BoardsReviewedMPN ESP-12E NodeMCU v1.0Used in 2 projects
ESP8266
In short

What is the NodeMCU ESP8266 (CP2102) and what is it used for?

ESP8266 Wi-Fi board with USB, a 3.3 V regulator and breadboard-friendly pins. Makers use it for first Wi-Fi projects, IoT dashboards.

How it works

An ESP8266 Wi-Fi chip with flash, a 3.3 V regulator and a USB-to-serial bridge that also pulses reset and GPIO0 for automatic uploads.

Key specifications

Development board specValue
MicrocontrollerESP8266EX, Tensilica L106
Clock80 or 160 MHz
Flash4 MB
RAMAbout 80 KB for user data
Logic level3.3 V (not 5 V tolerant)
Input voltage5 V USB or 5 to 9 V on VIN depending on board
I/O pins11 usable GPIO
ADC1 channel, 0 to 1 V at the chip (board divider gives about 0 to 3.3 V)
WirelessWi-Fi 2.4 GHz 802.11 b/g/n
Current per I/O pin12 mA recommended

Pinout

VIN5 V in (to the on-board 3.3 V regulator)
3V33.3 V out
D1GPIO5, default I2C SCL
D2GPIO4, default I2C SDA
D3GPIO0, boot mode (must be high at boot)
D4GPIO2, on-board LED (active low, high at boot)
D5 D6 D7GPIO14 12 13, SPI SCK MISO MOSI
D8GPIO15 (must be low at boot)
A0Analog in (board divider gives about 0 to 3.3 V)

How to use it

Install the ESP8266 board package and the CP2102 driver, pick NodeMCU 1.0 and upload over USB. Keep loads off D3, D4 and D8 or the board may not boot. Pins are 3.3 V only, so use a level shifter for 5 V sensors.

Applications

Alternatives

Buy at

Common questions

What is the NodeMCU ESP8266 (CP2102) used for?

In maker projects: first Wi-Fi projects, IoT dashboards.

How does the NodeMCU ESP8266 (CP2102) work?

An ESP8266 Wi-Fi chip with flash, a 3.3 V regulator and a USB-to-serial bridge that also pulses reset and GPIO0 for automatic uploads.

What can I use instead of the NodeMCU ESP8266 (CP2102)?

Wemos D1 Mini ESP8266 and ESP32 DevKit V1.